MX8 Mesh
"S-SYSTEM + Packing the hip air cushion"
Mesh jacket made of strong and breathable mesh material together with reflective material of LUMIDEX and Reflex for good visibility.
Light shoulder and elbow CE padding are provided.
Color: Black/Red, Gray, Black, Black/Lime
Size: S, M, L, XL, 2XL, 3XL
CO2 cartridge: 50cc CO2
Weight:2.0kg
Material: Outshell : Mesh(Polyester), LUMIDEX, 500D(Nylon)
Lining : Mesh(Polyester)
Airbag Tube : Polyurethane
Included: 50cc CO2, Coiled wire long
Hit-Air CO2 Cartridge 50cc
Replacement gas 50cc cartridge
The cartridge will last indefinitely, but should be replaced with the first sign of rust or surface deterioration.
Hit-air jacket comes with a handy tool, which is to be used to complete the replacement of the cartridge quickly and easily by yourself.
Model : MLV-CS, VHR SM, VHR MD, Veat MC3, Vest JV, HS-5, MX-7, SKV, etc.
Buckle type Coiled Wire Long
Buckle type Coiled Wire Long
The same coiled wire as attached to the Hit-air jacket and vest.
Use for the tandem or for the second/third motorcycle.
Buckle type Connector holder
Buckle type Connector holder
To stop dangling of the coiled wire while not in use.
Key wire (ring) - 42mm diameter/15cm length
Binding wire (black) is supplied with the Hit-air
Buckle type Key ball set B-type
A set of a key ball and a buckle type female connector to connect/disconnect with a buckle type coiled wire now in use.
Use as the replacement for the damaged of lost set.
For MLV, VHR, RS1, SKV, PREMIUM, H and PRO models
Back padding LW2
Lightweight Back padding.
The world's lightest (115g) back protector meets the European Safety Standard (CE Marking).
Synergy between the CE back padding and the Hit-air system will produce a greater shock buffering effect.
Attachable to Velcro (female) on the back lining of the Hit-air jacket or vest.
Attachable also to the Harness B.
Color: Black
Size: Width 255mm X height 390mm
Weight: 115g
Material:EVA, Polypropylene, Polyethylene
Harness Back padding
Flexible Back padding.
Synergy between the Harness back padding and the Hit-air system will produce a greater shock buffering effect.
Attachable to Velcro (female) on the back lining of the Hit-air jacket or vest.
Attachable also to the Harness B.
Color: Black
Size: W175mm X H450mm
Weight: 140g
Material:Polyethylene
Separate Chest paddings
Disperse a shock "hollow structure".
In the event of an accident, a shock of impact by the projection of the handle or pillar will be dispersed by this padding, so that the possibility of rib fracture or damage of internal organs will be reduced.
Soft Velcro to be sewn onto the wear other than hit-air is supplied with the hit-air.
To attach to any other jacket or vest, sew the Velcro (female)- supplied with the hit-air-onto it.
Color: Black
Size: W120 X H220mm
Weight: 150g (for Pair)
Material: Polypropylene (hollow tructure)
HC Chest padding
The honeycomb structure.
The 3D honeycomb structure fits closely with the chest!
Light and flexible chest padding fits closely with the chest. The honeycomb structure absorbs the shock to the chest.
CE : prEN1621-3:2011
Soft Velcro to be sewn onto the wear other than hit-air is supplied with the hit-air.
To attach to any other jacket or vest, sew the Velcro (female)- supplied with the hit-air-onto it.
Color: Black
Size: W275 x H226mm
Weight: 190g
Material: Polypropylene, Polyethylene, Mesh
CE : prEN1621-3:2011
hit-air B-Liner 6
Suitable for the mesh jacket as its lining.
As the lining of high resistance to cold and wind, it makes the mesh jacket wearable in any season.
Moisture permeable and waterproof material of "INTERON" is used for light, soft and comfortable inner jacket.
Inner wear of waterproof, windbreak and cold protection.
The neoprene to the cuffs and long back length makes it functional and useful.
Color: Black
Size:
Small (corresponds with 2XS-XS)
Medium (corresponds with Small-Medium)
Large (corresponds with Large-X-Large)
Weight: 420g
Material:
Outshell : INTERON (Polyurethane film), Nylon, Neoprene
Lining : Fleece (Polyester)