PREMIUM - VHR
Quiet and comfort for motorcycle!
Simple structure and no-snap buttons make the deployment faster and smoother.
Color: Black
Size:
Small (corresponds with 2XS-XS) / Weight: 0.95kg
Medium (corresponds with S-XL) / Weight: 1kg
Large (corresponds with XL-3XL) / Weight: 1.1kg
CO2 cartridge:
50cc for Small, Medium
60cc for Large
Weight: 0.95 - 1.1kg
Material: 600D Polyester, Polyester mesh, LUMIDEX(Reflex),
Airbag Tube : Polyurethane
Included : 50cc or 60cc CO2, Coiled wire long
Hit-Air CO2 Cartridge 60cc
Replacement gas 60cc cartridge
The cartridge will last indefinitely, but should be replaced with the first sign of rust or surface deterioration.
Hit-air jacket comes with a handy tool, which is to be used to complete the replacement of the cartridge quickly and easily by yourself.
Model : MLV-C, MLV-RC, MLV-P, Motorrad-2, EU-6, RS-1, etc.
Hit-Air CO2 Cartridge 50cc
Replacement gas 50cc cartridge
The cartridge will last indefinitely, but should be replaced with the first sign of rust or surface deterioration.
Hit-air jacket comes with a handy tool, which is to be used to complete the replacement of the cartridge quickly and easily by yourself.
Model : MLV-CS, VHR SM, VHR MD, Veat MC3, Vest JV, HS-5, MX-7, SKV, etc.
Back padding LW2
Lightweight Back padding.
The world's lightest (115g) back protector meets the European Safety Standard (CE Marking).
Synergy between the CE back padding and the Hit-air system will produce a greater shock buffering effect.
Attachable to Velcro (female) on the back lining of the Hit-air jacket or vest.
Attachable also to the Harness B.
Color: Black
Size: Width 255mm X height 390mm
Weight: 115g
Material:EVA, Polypropylene, Polyethylene
Side Protectors for the harness
Attachable to the waist belt.
Attachable to the waist belt of Harness type
To be attached to side-belts of the harness type all-in-one airbag. The combination of side padding and the hit-air system brings about a greater shock-buffering effect.
Color: Black
Size: W230mm X H145mm X D20mm
Weight: 150g (for Pair)
Material: Main body / Polyethylene
Cover / 600D, Mesh (Polyester)
Separate Chest paddings
Disperse a shock "hollow structure".
In the event of an accident, a shock of impact by the projection of the handle or pillar will be dispersed by this padding, so that the possibility of rib fracture or damage of internal organs will be reduced.
Soft Velcro to be sewn onto the wear other than hit-air is supplied with the hit-air.
To attach to any other jacket or vest, sew the Velcro (female)- supplied with the hit-air-onto it.
Color: Black
Size: W120 X H220mm
Weight: 150g (for Pair)
Material: Polypropylene (hollow tructure)
HC Chest padding
The honeycomb structure.
The 3D honeycomb structure fits closely with the chest!
Light and flexible chest padding fits closely with the chest. The honeycomb structure absorbs the shock to the chest.
CE : prEN1621-3:2011
Soft Velcro to be sewn onto the wear other than hit-air is supplied with the hit-air.
To attach to any other jacket or vest, sew the Velcro (female)- supplied with the hit-air-onto it.
Color: Black
Size: W275 x H226mm
Weight: 190g
Material: Polypropylene, Polyethylene, Mesh
CE : prEN1621-3:2011
Velcro Cover for CE Back padding YM
Velcro Cover for CE Back padding YM
Cover : Ripstop(Nylon), Mesh(Poliester)
*Does not come with the protector
Buckle type Coiled Wire Long
Buckle type Coiled Wire Long
The same coiled wire as attached to the Hit-air jacket and vest.
Use for the tandem or for the second/third motorcycle.
Buckle type Connector holder
Buckle type Connector holder
To stop dangling of the coiled wire while not in use.
Key wire (ring) - 42mm diameter/15cm length
Binding wire (black) is supplied with the Hit-air